Filter
Top Products
31
INSTALLER
COMPONENT GUIDE
UNO-S1 Keypad-CAT-5 Connection
110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the
UNO-S1 Keypad and the CAM6.6 controller.
1
1
N
EWMARKET
, NH U.S.A.
DESIGNED IN USA MADE IN KOREA
BR
GR
OR
+12V
BR/W+12V
GND
GR/W
GND
OR/W
COM A
BL/WCOM B
BL
IR OUT
UNO-S1
System Control Keypad
STATUS IN
CAT-5 Connection
The UNO-S1 Keypad uses a 110-punchdown termi-
nal to provide a simple installation and strong connec-
tion for CAT-5 cable’s eight conductors. Punchdown
terminals require the use of a punchdown tool which
has been provided with the keypad kit. Attach the
CAT-5 cable to the 110-punchdown terminal on the
UNO-S1 Keypad as shown, matching the conductor
colors to the connection color guide. The keypad will
not operate properly if the terminations deviate from
the required connection order.
Caution:
Take care when using an impact 110 punchdown tool, as
this may overspread the contact points. Use of the
impact tool may propel stray bits of wire and jacket into
the keypad’s chassis and possibly cause a short in the
circuitry. Gently shake or blow air through the keypad
chassis to remove stray wire before the keypad is
installed into the junction box.