Filter
Top Products
109
RS-232
INTERFACE
IR
LR
A
UDIO
O
UTPUT
12VDC 1.5A
I
N
O
UT
NEWMARKET, NH U.S.A.
ST2
Smart Tuner
LINK
K
EYPAD
P
ORTS
T
UNER
1T
UNER
2
FM C
OAX
L
OOP
A
NTENNA
Serial#
MADE IN KOREA
IR
LR
A
UDIO
O
UTPUT
ST2-XM Tuner Back Panel
A
NTENNA
CAM6.6
CAM6.6 Back Panel (Controller ID 2)
CAM6.6 Back Panel
(Controller ID 1)
CAM6.6
102.5
UNO-S1
RCA “Y” Cable
RCA Cable
RCA Cable
CNBC
UNO-S1
CNBC
UNO-S2
102.5
A
NTENNA
SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH THREE TUNERS
Sharing an ST2 Dual Tuner with multiple CAM6.6 con-
trollers (with and without tuners)
The configuration below is suitable for 7 to 12 zones
that can access the ST2 Dual Tuner and the CAM6.6X
tuner. This configuration uses RCA “Y” cables from the
ST2 Tuner source outputs to connect to both CAM6.6
source inputs.
CAM6.6X -
Controller Setup Menu: Controller ID = 1
Peripheral Setup Menu: Controller ID = All Controllers
Source Setup Menu: Basic Setup Procedure:
Source # = 2; Source Name = XM;
Command Type = Peripheral
Source # = 3; Source Name = AM/FM;
Command Type = Peripheral
Output/Input Switch = Internal Source Output
RCA cable connected from Source 1 audio output on
CAM6.6X (1) to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 1 audio output
to Source 2 input on CAM6.6X (1)
RCA cable connected from ST2 Tuner 2 audio output
to Source 3 input on CAM6.6X (1)
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner;
Command Type = Peripheral
Source # = 2; Source Name = XM;
Command Type = Peripheral
Source # = 3; Source Name = AM/FM;
Command Type = Peripheral
Output/Input Switch = Input
RCA cable connected from Source 1 audio output on
CAM6.6X (1) to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 1 audio output
to Source 2 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 2 audio output
to Source 3 input on CAM6.6 (2)