Filter
Top Products
21
USER
INTERNAL SOURCE - XM TUNER
UNO-S2 Keypad Control
UNO-S2 Keypad Contr
ol of Tuner
Selecting the tuner
On the UNO-S2 keypad, press to select the
XM Tuner by choosing the tuner’s preassigned
source number (1).
Selecting a Mode
Push to toggle between XM modes.
Exiting a Mode
Press to exit XM mode selection menu.
Selecting the desired channel
Use and for manual channel selection.
The channel will appear on the keypad. To move
quickly through the channels, press and hold
either or for more than 1.5 seconds.
Signal Strength Mode
To check XM signal strength, press and hold
then release. The display shows the signal
strength rating. To exit, press again.
Selecting a Bank
To select a bank, press and hold for bank
up or for bank down. The bank’s name will
be temporarily displayed on the UNO-S2.
Recalling a Memory Preset
Press and to scroll through the memo-
ry presets for the selected bank. This procedure
will step through all of the presets in the current
bank, then loop back to start at the first one.
Only configured presets will be displayed.
Mute
Press to mute/unmute the tuner audio output.