Filter
Top Products
Installation
30 LightStyle™ LS-12HBd Installation/Operation Manual
PRE
L
IMINAR
Y
Installing the Anamorphic Lens Transport Assembly: After installing the Transport
Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the
Anamorphic Lens Transport Assembly.
1. Do not use the mounting screws provided with the ceiling
mounting kit. Use only the hardware provided with the Transport
Assembly Attachment plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Caution
Screw, Phillips PH,
M4 x 30mm
Lock Washer
Flat Washer
5/8" Nylon Spacer
Ceiling Mount Plate
Attachment Plate
Projector (bottom)
Hardware for Attachment Plate
and Ceiling Mount Plate (4 Places):
Attachment Points
for Security Hooks