Filter
Top Products
System Overview
6 LightStyle™ LS-12HBd Installation/Operation Manual
PRE
L
IMINAR
Y
2.1
Projector
A LightStyle™ Series LS-12HBd Active 3D Projection System can display both traditional
2D and stereoscopic 3D video content.
An active 3D presentation requires a specialized video signal source configuration and
content to be displayed correctly. Images from a stereo 3D video source consist of a
series of images (called frames or fields) that alternate quickly between two slightly
different view points, corresponding to a viewer’s left and right eyes.
When these frames are displayed fast enough and viewed with special stereo glasses
synchronized to the left/right changes, the resulting image appears with the same depth
and perspective that is sensed in the real world.
Figure 2-2 and Figure 2-3 show the key LS-12HBd components.
Figure 2-2. LS-12HBd Front/Side View
• POWER BUTTON/STATUS LED
Indicates projector status as follows:
• Solid green = AC power present, ready to turn on (lamp not lit)
• Flashing green = lamp is warming up or cooling down; keypad functions not allowed
• Off = Lamp lit, projector functioning normally
• Alternating green/red = Lamp problem (door open, unable to strike, end of life), user
intervention likely to fix problem
• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix
problem
• Solid red = Error that requires servicing (fan fail, Power-on self-test fail etc.)
Keypad
Exhaust
Vent
Intake
Vent
Power Button/
Status LED
Projection Lens