Filter
Top Products
CD-100K Phonograph
2-60 21822666
Table 2-5A. Menu & Command Descriptions
Continued
Code Description
74 All Audit Report - Starts all 4 audit reports.
75 Setup Report - Starts the phonograph Setup Report.
76 Error History Report - Starts the Accumulated Phonograph Errors Report.
77 Disc Condition Report - Starts the Disc Condition Report.
78 Baud Rate - Selects either 600, 1200, 2400, 4800, or 9600 baud for printing reports. Hold RESET and
press 9 to toggle between 600, 1200, 2400, 4800, and 9600 baud. Press POPULAR to save the change.
Also, Spec Report is used to eliminate spaces from the report. Type 0001, then press POPULAR to
eliminate spaces. To retain spaces, type 0000, then press POPULAR. A carriage return delay (CR MS
Delay) is available to interface with slower printers.
79 Cancel Reports - Stops all report printing.
8 STATUS - The STATUS menu defines credit and displays figures, which indicate the condition of the
phonograph.
80 Error History - Displays the error history of the phonograph (see Errors and Warnings in Section 5).
81 Clear Errors - Clears all errors from the phonographs error log. Press POPULAR to perform this
function. The display will blink when this command is executed.
82 Clear Credits - Clears all current credit. Press POPULAR to perform this function. The display will blink
when this command is executed.
83 Clear Selections - Clears all selections remaining to be played. Press POPULAR to perform this
function. The display will blink when this command is executed.
84 CREDITS - Displays and changes the number of credits. Type the number of credits then press
POPULAR.
85 Selections Left - Displays the current number of selections left to be played.
86 Disc Conditions - Displays the condition of discs played (see Disc Conditions in Section 5).
87 Clear Conditions - Clears the current conditions from the phonograph. Press POPULAR to perform
this function. The display will blink when this command is executed.
88 Display Software Versions - Displays the current version number of phonograph modules. Hold
RESET and press 3 to view the next device version number.