Filter
Top Products
CD-100K Phonograph
2-58 21822666
Table 2-5A. Menu & Command Descriptions
Continued
Code Description
693 Lockout Count - Adds the selection to the LOCKOUT LIST (60) when the DISC CONDITIONS
NUMBER OF SKIP OCCURRENCES reaches the programmed value. To change the LOCKOUT
COUNT, type the new number and then press POPULAR.
694 Play Limit - Sets a maximum time for a selection to play before it is canceled. A 0 entry disables this feature.
Valid times are from 60 to 999 seconds. If the optional volume control module is installed, the volume of
the selection will fade before the selection is canceled.
695 Cancel Autoplay - Cancels the autoplay selection when a paid selection is entered. When this feature
is turned ON, the Autoplay selection will cancel within 15 seconds and the paid selection will play next. When
this feature is turned OFF, the Autoplay selection will finish playing before the paid selection plays. The
default for this feature is ON.
696 Autoplay Only - Stores the disc numbers for up to 25 discs. These disc numbers can be selected by
Autoplay, but they cannot be selected by customers (see Programming Autoplays, Premiums, Priorities,
Lockouts, and Pairs).
697 Daylight Savings Time - Automatically adjusts daylight saving time. STD moves the clock ahead one
hour at 2:00 AM on the first Sunday of April. This mode will also move the clock back one hour at 2:00
AM on the last Sunday of October. NONSTD lets you select which months and days of the month that
daylight savings will be turned ON and OFF. Hold RESET and press 9 to select STD, NONSTD, or OFF.
Press POPULAR to save your choice. If you select NONSTD, the display shows DAYLIT ON - - / - -.
Type two digits for the month code to turn daylight savings ON and then press POPULAR. Type the two-
digit day number (1 through 31). Note that the CCC will only accept the correct maximum number. Then
press POPULAR. Hold RESET and press 9 to change the display to show: DAYLIT OFF - - / - -. Type
two digits for the month code to turn daylight savings OFF and then press POPULAR. Type the two-digit
day number (1 through 31). Note that the CCC will only accept the correct maximum number. Then press
POPULAR.
698 Automat Clr - Clears audit data. If this command is set to ON, and the AUDIT START button has been
used to start the report, then the audit data will be cleared when the printing stops and the phonograph is
in NORMAL mode. Hold RESET and press 9 to toggle this command ON and OFF. Press POPULAR
to save your choice.
699 MORE OPTIONS 2 - This menu is a continuation of the OPTIONS menu.
6990 Timlock - Displays and sets timed lockout selections or discs (25 maximum). See Programming
Autoplay, Premiums, Priorities, Lockouts, and Pairs.
6991 LockSch SMTWTFS - Allows you to select the days of the week and the start and stop times for timed
lockouts. (See the Timed Free Play and Timed Lockouts Scheduling Tutorial.)