Filter
Top Products
Section 2: Installation & Programming
21822666 2-33
Paging
Paging circuitry is part of the Preamplifier. The Microphone cable plugs directly into the preamplifier.
CHANGING THE NUMBER OF CREDITS REMAINING
Use these steps to increase or decrease the number of CREDITS REMAINING on the phonograph.
1. Enter the SERVICE mode by pulling the SERVICE button out to the SERVICE position.
2. Type 84, then type the number of CREDITS REMAINING that you want. Press POPULAR to complete
the change.
ENTERING THE SERVICE MODE
Menus can only be used while the phonograph is in the SERVICE mode. To enter the SERVICE mode, open the
top door and pull the SERVICE button out (Figure 2-4) to the SERVICE position.
When the phonograph is placed into the SERVICE mode, the message *SERVICE MODE* appears on the digital
display