Filter
Top Products
Section 2: Installation & Programming
21822666 2-83
Example for programming a new message
When this example is complete, the display will read HELLO TOM as message number three.
A. Follow step AA to obtain MSG
1 EDT DEL VU.
B. Push key 3 to edit message three. Push POPULAR.
C. Push POPULAR to go to the edit screen.
D. Display should be blank except the cursor flashing at digit eight (see Table 2-6).
E. Push key 1 until the display shows H. Push POPULAR (cursor points to the next character).
F. Push key 1 until the display shows E. Push POPULAR.
G. Push key 1 until display shows L. Press POPULAR.
H. Push key 7. Display shows L. Press POPULAR.
I. Push key 7. Display shows L. Then push key 1 until the display shows O. Press POPULAR.
J. Push POPULAR. Display shows a “space”.
K. Push key 1 until display shows T. Push POPULAR.
L. Push key 7. Display shows T. Then push key 0 until display shows O. Push POPULAR.
M. Push key 7. Display shows O. Then push key 0 until display shows M. Push POPULAR.
N. Press the key 9 to exit and save the message.
12 345678 910111213141516
AMSG 1EDTDELVU
BMSG 3 ED T DEL VU
C__
DH__
EHE__
FHEL__
GHELL__
HHELLO__
IHELLO__
JHELLO T__
KELLO TO__
LLLO TOM__
MMSG 3EDTDELVU
Table 2-6. Example Message Program Sequence Display