Filter
Top Products
CD-100K Phonograph
2-52 21822666
Table 2-5A. Menu & Command Descriptions
Continued
Code Description
33 Cancel Initialization - Cancels initializations that have been started with either of the previous options
(30 or 31). Press POPULAR to perform this function. The display will blink when the command is executed.
34 Initialized - Displays the number of discs that have been initialized.
35 Number of Skips or Time Error Before Log - Allows logging disc conditions without canceling
selections. Type the new number, then press POPULAR. See Disc Conditions in Section 5 for a detailed
explanation of the Skip Log.
36 Skip Cancel - Determines the maximum number of times that a CD may skip while playing before it is
automatically canceled. Type the new number then press POPULAR. See Disc Conditions in Section 5
for a detailed explanation of SKIP CANCEL.
37 Time Cancel - The absolute time difference in seconds between current playing position (time position
on the CD) and actual running time (phonograph time) before it is automatically canceled. Type the new
number then press POPULAR. See Disc Conditions in Section 5 for a detailed explanation of TIME
CANCEL.
38 Time HH:MM:— - Displays and sets the time-of-day. Hours and minutes can be entered, seconds will
begin automatically at 00 (midnight) and count to 23:59, which is the 24-hour clock, or military time. Type
the new hours and press POPULAR. Type the new minutes and then press POPULAR.
Midnight Is entered as 00:00. 12:59 PM (after noon) is the same, but:
1:00 PM Is entered as 13:00 and all the succeeding times are entered as 12+ the hour:
12:59 PM = 12:59 5:00 PM = 17:00 10:00 PM = 22:00
1:00 PM = 13:00 6:00 PM = 18:00 11:00 PM = 23:00
2:00 PM = 14:00 7:00 PM = 19:00 12:00 AM = 00:00
3:00 PM = 15:00 8:00 PM = 20:00 9:00 PM = 21:00
4:00 PM = 16:00
39 Date MM/DD/YYYY - Displays and sets the date. Any date from the year 1980 to 2087 is allowed.
4 AUTOPLAY - This menu sets AUTOPLAY ON or OFF and defines the Autoplay characteristics. If
AUTOPLAY IS (COMMAND 40) has been set to STD, then COMMANDS 40 through 47 in this table
apply. If AUTOPLAY IS (COMMAND 40) has been set to CDT, then COMMANDS 40 through 44
and COMMAND 47 in this table apply. If AUTOPLAY IS (COMMAND 40) has been set to ENH, then
COMMANDS 40 through 49 apply and you should read about how to used these commands in the
Enhanced Autoplay Tutorial that appears at the end of this section.
40 Autoplay Is - Displays and sets the AUTOPLAY style to either STANDARD, ENHANCED, CREDIT,
or OFF. Press and hold RESET and then press 9 to toggle between the four options and press POPULAR
to select the option that you want.