Filter
Top Products
6
Receiver front/top panel
Transmitter back panel
Item Description
1
Power and link status indicator ( )
• Blinking—The power is on and the receiver is searching for the transmitter or is in sleep mode.
• On—The transmitter and receiver are linked.
•Off—The power is off.
Item Description
1 DC IN jack—Connect the power adapter labeled “transmitter” to this jack.
2 Power switch—Turns the transmitter on or off.
3 HDMI/WVAN switch— A quick press (<1 second) toggles the HDMI switch input to select the next HDMI input.
A long press (>3 seconds) toggles WirelessHD output between one or more WirelessHD receivers in the same
room.
4-7 HDMI input—Connect up to four HDMI source devices to the HDMI inputs using high-speed HDMI cables.
1
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 6 Monday, March 14, 2011 3:45 PM