RCA HT35752BD Home Theater System User Manual


 
27
Final Installation
(continued)
5.Pull the foam pads out from inside of each of the push plates. Remove the
paper backing from each foam pad and attach it over the top of each door as
shown below making sure it is located in front of the magnetic latch.
Install Glass Doors (continued)
3.Slide doors into hinges with the metal mounting plates toward the inside,
facing the screw holes in the hinge. Secure door into each hinge by inserting the
supplied 1/4” hinge screws into the hinge and gently tightening them against
the metal mounting plate.
Note: The glass door which has RCA Custom Home Theatre on it goes on the left
hand side of the cabinet.
Glass
Door
Inside of Door Shown
4.Check each door for proper alignment and adjust, if necessary, by loosening
the screws and moving glass door in or out on the hinge.
Push
Plate
Foam
Pad
Glass
Door
6.Repeat the procedures for the remaining doors.
If you have any questions or are missing any
components, please contact 1-800-721-4007