Filter
Top Products
Section 1: Introduction- Basic Connector & Indicator Descriptions
13
REAR PANEL
OVERALL
DATAPORT (unlabeled)- This is the “output”
DataPort.
If the DSP-3 is directly mounted on a 2-RU QSC
DataPort equipped amplifier, this connector plugs
into the amplifier’s DataPort connector.
If used with 3-RU QSC DataPort equipped amplifi-
ers, the DSP-3 will need to be remotely mounted
and a male-female DataPort cable used to inter-
connect the amp & DSP-3.
If used with a non-DataPort amp (QSC or other),
this connector will not be used.