Filter
Top Products
7
Connection 2
Connection to a TV and video components
COMPONENT IN/OUT jacks
COMPONENT VIDEO provides the best video quality and
should be used as your first choice.
If your DVD player and TV (or monitor) have
COMPONENT VIDEO jacks, connect them with quality
component video cables.
S-VIDEO or VIDEO jacks
S-VIDEO connection is your second choice and is
superior to the standard composite video connection.
If the component has an S-VIDEO jack, connect it with a
high quality S-VIDEO cable.
If neither COMPONENT VIDEO nor S-VIDEO is available,
connect the component with a high quality RCA cable
designed for video applications.
The video signal from COMPONENT, S-VIDEO or VIDEO
jacks cannot be mixed.
For example, the signal input into the COMPONENT IN
jacks is output from the COMPONENT OUT jacks only.
Be sure to connect all the components via the same kind
of jacks.
F
E
AC OUTLET (switched)
Not available for AUSTRALIA, UK model.
This outlet is active only when the unit is on.
Caution:
Make sure that the total power consumption of all
equipment connected to the outlet(s) does not exceed 100
watts.
AC Power Cord
After all other connections are complete, connect the plug
to the AC wall socket.
If you are not going to use the unit for some time,
disconnect the power cord from the wall socket. (Leaving
the power cord unconnected for longer than 14 days will
cause the tuner memory presets to be lost.)
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the
power cord.
H
G
TV (MONITOR)
DVD, VCR, etc.
EF
G
H