Filter
Top Products
25
Surround Mode 1
• When EXTERNAL IN is selected, the DSP and the AUTO
button do not work.
If a digital device is connected to DIGITAL IN terminals,
select desired decoding mode by pressing the AUTO
button.
Each time the AUTO button is pressed, the decoding mode
is changed as follows:
IN-AUTO (default):
The appropriate decoding mode is selected automatically.
Usually, select this.
IN-DTS:
Select this only when the input signal is DTS.
IN-PCM:
Select this only when the input signal is PCM.
• The AUTO button works only when the function is set to
VIDEO or CD and the digital input is selected.
• When IN-AUTO is selected, noise may be heard during
playback of a DVD recorded in DTS format. In this case,
select IN-DTS.
• If the selected decoding mode does not match with the
input signal, “DIGITAL” indicator will blink and no sound will
be heard.
Select the desired surround mode by pressing the DSP
button.
Each time the DSP button is pressed, the surround mode
changes.
When Dolby Digital signals are input and IN-AUTO is
selected, the surround mode is set to DOLBY DIGITAL
automatically.
If you press the DSP button, you can select one of the
following surround modes:
When the source is Dolby Digital EX:
DOLBY DIGITAL EX, VIRTUAL NARROW, VIRTUAL
WIDE
When the source is Dolby Digital 5.1:
DOLBY DIGITAL, VIRTUAL NARROW, VIRTUAL WIDE,
DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx
MUSIC
When the source is Dolby Digital 2-channel:
DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx
MUSIC, DOLBY PRO LOGIC, VIRTUAL NARROW,
VIRTUAL WIDE
When DTS signals are input and IN-AUTO or IN-DTS is
selected, the surround mode is set to DTS or DTS-ES
automatically.
If you press the DSP button, you can select one of the
following surround modes:
When the source is DTS-ES:
DTS-ES
When the source is DTS:
DTS, DTS+NEO:6
B
A
2
1
2
1