Filter
Top Products
5
Connection (AM antenna)
AM Indoor Loop Antenna
The high-performance AM loop antenna provided with this
unit is sufficient for good reception in most areas.
To stand the loop antenna on a surface, fix the claw to the
slot in the antenna base.
Connect the loop antenna’s wires to the AM antenna
terminals.
How to connect:
Press the lever, insert the end of the cord, then release
the lever. Make sure it is fastened securely by pulling the
cord lightly. Make sure only the bare, stripped wire is
inserted in the jack and that no plastic insulation is
preventing contact between the antenna wire and
terminal.
Place the antenna on a shelf or hang it on a window
frame, etc., in the direction which gives the best reception.
Keep all other wires such as power cords, speaker wires
or interconnect wires as far away as possible from the
antenna.
• If the AM loop antenna provided does not deliver sufficient
reception (often due to being too far from the transmitter
or in a concrete building, etc.), it may be necessary to use
an outdoor AM antenna.
Use either a high quality commercial AM antenna or, if not
available, an insulated wire more than 5 m long, strip one
end, and connect this to the terminal as shown.
The antenna wire should be strung outdoors or indoors
near a window. For better reception, connect the GND
terminal to a reliable ground.
Note:
Even when using an outdoor AM antenna, do not
disconnect the AM loop antenna.
AM Loop Antenna
Antenne-cadre AM intérieure
Antena de cuadro de AM interior
AM Outdoor Antenna
Antenne AM extérieure
Antena exterior AM