Filter
Top Products
29
DOLBY PRO LOGIC IIx MUSIC parameters
You can adjust the parameters for DOLBY PRO LOGIC IIx
MUSIC.
Select DOLBY PRO LOGIC IIx MUSIC mode by pressing
the DSP button.
Select the parameter to be changed by pressing the
PARAMETER button.
Each time the PARAMETER button is pressed, the
parameter is changed as follows:
Within 8 seconds, press the SELECT button to change the
value.
PANO (panorama):
This mode extends the front stereo image to include the
surround speakers for an exciting wraparound effect with
side wall imaging. Select “ON” or “OFF”.
The default setting is “OFF”.
C-WID (center width control):
This adjusts the center image so it may be heard only
from the center speaker, only from the left/right speakers
as a phantom image, or from all three front speakers to
varying degrees.
The adjustable range is from 0 to 7. The default setting is
“0”.
DIMEN (dimension control):
This adjusts the sound-field either towards the front or
towards the rear. The adjustable range is from –4 to +2.
The default setting is “–1”.
Repeat step and to adjust other parameters.
When all the configurations have been finished, leave the
unit for 8 seconds to exit.
32
3
2
1
3
2
1