Filter
Top Products
24
Dubbing from VIDEO 2 or 3 to VIDEO 1
Select VIDEO 2 or 3 by pressing the VIDEO button.
Start recording on the VCR connected to VIDEO 1 REC
jacks.
Start playback on the VCR connected to VIDEO 2 or 3
INPUT jacks.
The audio and video signals input from VIDEO 2 or 3 are
output from VIDEO 1 REC jacks.
• Copy protected DVD discs cannot be dubbed.
• The video signal from S-VIDEO or VIDEO jacks cannot be
mixed. Be sure to connect all the components via the same
kind of jacks.
3
2
1
Dubbing the audio and video signals separately
While dubbing the video signal of VIDEO 2 or 3, you can
replace the sound from VCR with the sound from an audio
source such as CD.
Select the video source to be recorded (VIDEO 2 or 3)
using the INPUT SELECTOR buttons of the remote control
unit.
Select the audio source to be recorded (CD, TAPE, etc.)
using the INPUT SELECTOR buttons of the remote control
unit. Do not turn the INPUT SELECTOR buttons of the main
unit, or the video source selection in step might be
cancelled.
Start recording on the VCR connected to VIDEO 1 REC
jacks.
Start playback of the video and audio source to be
recorded.
The picture from the video component appears on the TV,
and the sound from the audio component is output from the
speakers.
4
3
1
2
1
2
1