Filter
Top Products
31
Tuner 1
Select TUNER by press the AUDIO button (or press the
TUNER button of the remote control unit).
Make sure the antennas have been connected (see page
4).
Select AM or FM by pressing the BAND button (or press the
TUNER button of the remote control unit).
• If the BAND button is pressed while the source other than
TUNER was selected, the source will be switched to
TUNER automatically.
Press the TUNING MODE button to select the tuning mode.
Each time the TUNING MODE button is pressed, the tuning
mode changes as follows:
Automatic tuning mode
(“AUTO” indicator lights on the display.)
Manual tuning mode
(no indicator)
Preset tuning mode
(“PRESET” indicator lights.)
Select the Manual tuning mode or the Automatic tuning
mode.
• When using the remote control unit, you can skip this step.
Press the TUNING/PRESET button to tune in a station.
In the Automatic tuning mode, the unit starts searching for a
station. When a station is tuned in, the tuning process will
stop automatically.
If you want to stop the tuning process, press the TUNING
MODE button.
In the Manual tuning mode, hold down the
TUNING/PRESET button and release it when the station is
tuned in.
When the TUNING/PRESET button is pressed
momentarily, the frequency changes by a fixed step (FM:
50 kHz steps, AM: 9 kHz steps).
4
3
2
1
2
3
4
1