Filter
Top Products
13
The equipment draws nominal non-operating power from
the AC outlet with its POWER switch in the OFF position.
PARAMETER
Use this button to change parameters of DOLBY PRO
LOGIC IIx MUSIC.
PHONES
For private listening, insert the headphones plug into this
jack, and adjust the volume by turning the MASTER
VOLUME knob.
CHANNEL SELECTOR
Select a speaker by pressing this button repeatedly, and
adjust the level using the LEVEL buttons.
SELECT/LEVEL
Use these buttons to adjust the level of each speaker, etc.
TONE MODE
Use this button to select a tone mode.
SPEAKER SETUP
Use this button to start speaker configuration.
DYNAMIC RANGE
Use this button to compress the dynamic range during
playback of a disc recorded in Dolby Digital.
MEMORY/ENTER
Use this button to store preset channels into memory.
TUNING/PRESET
In the manual tuning mode, use these buttons to tune in a
station.
In the preset tuning mode, use these buttons to select a
preset channel.
TUNING MODE
Use this button to select a tuning mode.
FM MODE
In FM tuner mode, use this button to select stereo or
monaural.
BAND
Use this button to select FM or AM.
VIDEO 3 INPUT jacks
You can connect a component such as a portable CD,
game player, etc. to these jacks.
When using these jacks, remove the cap. When you don’t
use them, leave the cap in place.
Buttons for RDS function (European models only)
In FM tuner mode, use these buttons for RDS function.
RDS is available in European countries only.
b
a
Z
Y
X
W
V
U
T
S
R
Q
P
O
POWER
Press this switch to turn the unit standby or off.
STANDBY/ON
When the POWER switch of the main unit is depressed, use
this button to turn the unit on or standby.
SPEAKER
Use this button to turn on or off the speakers.
on : Sound is output from the speakers.
off : No sound is output from the speakers.
DIGITAL INPUTS
Use this button to select one of the digital input terminals.
Standby indicator
This indicator lights when the unit is in the standby mode.
When the unit is turned on, it goes off.
Speaker indicator
This indicator lights when the SPEAKER button is set to on.
Remote Sensor
When operating the remote control unit, point it towards the
remote sensor.
Display
When the unit is on, the current status of the unit is
displayed.
MASTER VOLUME
Turn this knob (or press the VOLUME buttons of the remote
control unit) to adjust the master volume.
INPUT SELECTOR
Use this buttons to select a source.
EXTERNAL IN
Use this button to select the source connected to the
EXTERNAL IN jacks.
AUTO
Use this button to change the decoding mode of digital
signals.
DSP
Use these buttons to select a surround mode.
STEREO
Use this button to select stereo mode. Sound is output only
from the front speakers (and the sub-woofer).
N
M
L
K
J
I
H
G
F
E
D
C
B
A