Filter
Top Products
Instructions for Windows
Page 28
To format media
You can format one disc, or multiple discs, as shown below:
To format a single disc, right-click on
the disc and select 'Format DVD-RAM
Disc..." from the submenu.
To format multiple discs, control-click
to select multiple discs, and select
'Format DVD-RAM Discs..." from the
submenu.
Either of the options above will bring up the following format dialog box:
At the top of this box, you may give the media a name. It is suggested that you name
each disc with a unique name.
Note: naming each disc with a unique name is only possible when formatting
individual discs. If you selected multiple discs, the name at the top of the format
dialog box will be applied to each of the discs that you have selected.
Next, select which type of format you would like to use - Quick, or Certified. (See
explanation of format types above).
At the bottom of this box you will see additional information, such as any existing volume
name tag, the carousel slot number, and the number of the disc being formatted (if you
have chosen multiple discs to format).