Filter
Top Products
Instructions for Windows
Page 19
PowerFile Changer front panel
The buttons and features on the front panel of the PowerFile Changer are described below.
Load/unload slot
This is the front slot where discs are loaded into and unloaded from the Changer. Discs
must be loaded with the “data” side on the left and the “label” side on the right.
Display window
This two-line LCD readout displays unit status and messages.
Power button
This is the button that powers on and turns off the Changer.
Control function buttons
Many of the PowerFile Changer functions can be accessed by using the buttons on the
Changer front panel:
Load
The Load button opens the “gate” in the load/unload slot in the front panel, allowing discs to
be loaded into the Changer.
Eject
The Eject button directs the Changer to lift a disc out of the unit and place it in the
load/unload slot for removal. (This action is referred to as "Unload" in the software
commands).