Filter
Top Products
User’s Manual of FGSW-2620VM / FGSW-2620PVM
48
The system log will only be sent to the remote system log server with its IP assigned.
The page includes the following fields:
Object Description
Syslog Server IP Assign the system log server IP address to which the log will be sent.
None :
Never send syslog message to syslog serverme, and Max Age
parameters of the root bridge, regardless of how it is configured.
Major:
only send major syslog to syslog server, eg: link up/down, system
warm/cold start.
Log Level
All :
send all syslog message to syslog server.
4.2.5 Firmware Upgrade
It provides the functions allowing the user to update the switch firmware via the Trivial File Transfer Protocol (TFTP)
server. Before updating, make sure the TFTP server is ready and the firmware image is located on the TFTP server.
4.2.5.1 TFTP Firmware Upgrade
The Firmware Upgrade page provides the functions to allow a user to update the Managed Switch firmware from the TFTP
server in the network. Before updating, make sure you have your TFTP server ready and the firmware image is on the
TFTP server. The screen in Figure 4-2-9 appears.
Use this menu to download a file from specified TFTP server to the Managed Switch.
Figure 4-2-9: Firmware Upgrade interface
The page includes the following fields:
Object Description
TFTP Server IP Address: Type in your TFTP server IP.
Firmware File Name: Type in the name of the firmware image file to be updated.