Filter
Top Products
User’s Manual of FGSW-2620VM / FGSW-2620PVM
170
6.18 Power over Ethernet Commands (PLANET FGSW-2620PVM)
show poe Show System Power over Ethernet information
show poe status Show PoE port information
poe limit-mode Configure System PoE power limit mode information
poe enable Enabling or disabling the port POE injects function
poe priority Set port priority for the power supply management
poe maximum-power Enabling or disabling per port power output limit
6.18.1 Display System PoE status
show poe
Description:
Show System Power over Ethernet information
Command Level
Global Configuration
Example:
Switch(config)# show poe
Maximum Available Power
System Operation Status
PoE Power Consumption
Usage Threshold
PoE Power limit mode
:190Watts
: on
: 55 watts
: 21%
: Port Priority
show poe status
Description:
Show per PoE port information
Command Level
Global Configuration
Syntax:
show poe status [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example 1:
Switch(config)# show poe status 1
Port Admin Oper Priority Power Limit[W] Current Current[mA] Device