User’s Manual of FGSW-2620VM / FGSW-2620PVM
108
Deny: Drop packet.
VLAN
Any / VID.
Any: Any VLAN id.
VID: 1~4094. A certain VLAN id.
Any
Packet Type
IPv4 / Non-IPv4 / Binding
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
IPv4
Src IP Address
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
Any: Any IP address.
IP : A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Notice: This is not subnet mask.
Any
Dst IP Address
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
Any: Any IP address.
IP : A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Any
IP Fragment
Set this field if Packet Type is IPv4, else ignore.
Uncheck / Check
Uncheck: Not check IP fragment field.
Check: Check IP fragment field.
Uncheck
L4 Protocol
Set this field if Packet Type is IPv4, else ignore.
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
Any
Protocol
Set this field if Packet Type is IPv4, else ignore.
0~255.
If protocol not find in L4 Protocol field, you can direct assign
number.
TCP
Set this field if Packet Type is IPv4, else ignore.
Any / FTP(21) / HTTP(80)
Any
Port
Set this field if Packet Type is IPv4, else ignore.
0~65535
If TCP port not find in TCP field, you can direct assign number.
UDP
Set this field if Packet Type is IPv4, else ignore.
Any / DHCP(67) / TFTP(69) / NetBios(137)
Any