Filter
Top Products
User’s Manual of FGSW-2620VM / FGSW-2620PVM
147
6.7.3 Reboot switch
boot
Description:
Reboot (warm-start) the switch.
6.7.4 Reset to Default
erase startup-config
Description:
Reset configurations to default factory settings at next boot time.
6.7.5 TFTP Update Firmware
copy tftp firmware
Description:
Download firmware from TFTP server.
Syntax:
copy tftp firmware <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.
6.7.6 Restore Configure File
copy tftp <running-config | flash>
Description:
Retrieve configuration from the TFTP server. If the remote file is the text file of CLI commands, use the keyword
running-config.
If the remote file is the configuration flash image of the switch instead, use the keyword flash.
Syntax:
copy tftp <running-config | flash> <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.
6.7.7 Backup Configure File
copy <running-config | flash> tftp
Description:
Send configuration to the TFTP server. If you want to save the configuration in a text file of CLI commands, use the