Filter
Top Products
User’s Manual of FGSW-2620VM / FGSW-2620PVM
16
1.5 Product Specification
Product FGSW-2620VM FGSW-2620PVM
Hardware Specification
Hardware Version
Version 2 Version 1
10/100Mbps Copper Ports
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
1000Mbps Copper Ports
2 10/100/1000Base-T RJ-45 port
SFP/mini-GBIC Slots
2 SFP interfaces, shared with Port-25 and Port-26
Switch Architecture
Store-and-Forward
Switch Fabric
8.8Gbps / non-blocking
Switch Throughput
6.547Mpps@64Bytes
Address Table
8K entries
Share Data Buffer
512Kbytes
Flash
4Mbytess
DRAM
16Mbytes 32Mbytes
Maximum Frame Size
9K Bytes
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED
Power
Link/Activity (Green)
1000 LNK / ACT(Green)
10/100 LNK / ACT(Green)
Power, FAN Alarm
Link/Activity (Green)
PoE In-Use (Amber)
1000 LNK / ACT(Green)
10/100 LNK / ACT(Green)
Dimensions ( W x D x H)
440 x 120 x 44 mm, 1U height 440 x 200 x 44 mm, 1U height
Weight
1.87kg 2.6kg
Power Requirement
100~240V AC, 50-60 Hz
Power Consumption
25 Watts (Full load) 210 Watts (Full PoE Load)
Operating Temperature
Standard: 0 ~ 50 Degree C
Operating Humidity
10% to 90% (Non-condensing)
Storage Temperature
-40 Degree C ~ 85 Degree C
Layer 2 Functions
Management Interface
Telnet, Web Browser, SNMP v1, v2c
Console, Telnet, Web Browser, SNMP
v1, v2c and v3
Port Configuration
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable.