Filter
Top Products
86
Techno Tidbits and Problem-solving
Specifications
FM Tuner Section
Frequency Range ......................... 87.5 MHz to 108 MHz
Usable Sensitivity...... Mono: 15.2 dBf, IHF (1.6 µV/75 Ω)
50 dB Quieting Sensitivity.......................Mono: 20.2 dBf
Stereo: 41.2 dBf
Signal-to-Noise Ratio ................. Mono: 76 dB (at 85 dBf)
Stereo: 72 dB (at 85 dBf)
Distortion ...................................... Stereo: 0.6 % (1 kHz)
Alternate Channel Selectivity ................. 70 dB (400 kHz)
Stereo Separation ...................................... 40 dB (1 kHz)
Frequency Response ............... 30 Hz to 15 kHz (± 1) dB
Antenna Input .......................................75 Ω unbalanced
AM Tuner Section
Frequency Range ........ 531 kHz to 1,620 kHz(9kHz step)
Sensitivity (IHF, Loop antenna)......................... 350 µV/m
Selectivity............................................................... 25 dB
Signal-to-Noise Ratio .............................................. 50 dB
Antenna......................................................Loop antenna
Miscellaneous
Power Requirements
Singaporean model ................. 220-230V AC, 50/60Hz
Power Consumption
Singaporean model ........................................... 400 W
Power Consumption in Standby mode .................. 1.0 W
AC Outlet
SWITCHED (×2)................................Total 100 W MAX
UNSWITCHED ......................................... 100 W MAX
Dimensions .................. 420 (W) × 173 (H) × 470 (D) mm
Weight (without package) ....................................16.2 kg
Furnished Parts
FM Antenna ...................................................................1
AM Loop Antenna ..........................................................1
Dry Cell Batteries (SIZE “AA” (IEC LR6)) .......................2
Remote Control Unit ......................................................1
Operating Instructions ...................................................1
NOTE:
Specifications and the design are subject to possible
modifications without notice, due to improvements.
VSX-D938TX: (Singapore model)
Continuous Power Output (STEREO MODE)
Front .......110 W + 110 W (DIN; 1kHz, T.H.D 1%, 8 Ω)
Continuous Power Output (SURROUND MODE)
Front .......110 W + 110 W (DIN; 1kHz, T.H.D 1%, 8 Ω)
Center ...................110 W (DIN; 1kHz, T.H.D 1%, 8 Ω)
Surround............................................. 110 W + 110 W
(DIN; 1kHz, T.H.D 1%, 8 Ω)
Rated Power Output .............................. 100 W + 100 W
(20Hz–20kHz 0.09%, 8 Ω)
Input (Sensitivity/Impedance)
PHONO MM ..............................................4.7 mV/47 kΩ
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
MD/TAPE 1, TAPE 2 ..............................335 mV/47 kΩ
Frequency Response
PHONO MM ....................... 20 Hz to 20,000 Hz ±0.3 dB
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
MD/TAPE 1, TAPE 2 .............5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR 1 REC, VCR 2 REC, MD/TAPE 1 REC, TAPE 2 REC
.........................................................335 mV/2.2 kΩ
Tone Control
BASS ...................................................± 6 dB (100 Hz)
TREBLE ............................................... ± 6 dB (10 kHz)
LOUDNESS ..............................+3 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio [DIN(Continuous power output/50 mW]*
PHONO MM ............................................. 68 dB/61dB
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1,
TAPE 2......................................................92 dB/62 dB
VIDEO Section
Input (Sensitivity/Impedance)
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO .......1 Vp-p/75 Ω
Output (Level/Impedance)
VCR 1, VCR 2, MONITOR .........................1 Vp-p/75 Ω
Frequency Response
VCR 1, VCR 2, MONITOR ....5 Hz to 100,000 Hz dB
Signal-to-Noise Ratio .............................................. 65 dB
*
Direct: ON
+0
–3
+0
–3