Filter
Top Products
20
Displays and Controls
Front Panel (VSX-D938TX)
All the controls on the front panel are explained and/or referenced here. To open the front panel, push gently on
the lower third of the panel.
1 Main Power Switch (— OFF, _ ON)
2 STANDBY/ON button
Press to switch the receiver ON or into STANDBY
mode.
3 STANDBY indicator
Lights when the receiver is in STANDBY mode.
(Please note that this receiver consumes a small
amount of power (1.0 W) during the standby
mode.)
4 DSP MODE button (See p.40-41)
Press repeatedly to select a DSP sound mode.
(HALL 1, HALL 2, JAZZ, DANCE, THEATER 1, or
THEATER 2). Use these modes to produce
surround sound from standard (two channel)
stereo sources and create different listening
environments.
5 STEREO button (See p.40-41)
Press to select the STEREO sound mode. In this
mode, sound comes from the front (left and right)
speakers only.
6 2/DTS buttons (See p. 39, 41 and 76-
78)
THX CINEMA: Press to select the HOME THX
CINEMA sound mode when listening to Dolby
Digital, Dolby Pro Logic or DTS a variety of other
sources.
ADVANCED THEATER : Press to select one of
the four Advanced Theater modes.
STANDARD (MPEG) : Press to select the
STANDARD/MPEG mode.
7 Display (See page 18)
8 Remote sensor
Point the remote control toward the remote
sensor to operate the receiver.
9 TAPE 2 MONITOR button (See p.66)
Selects the tape deck (MD recorder, etc.)
connected to the TAPE 2 MOINTOR inputs/
outputs. Allows monitoring of a recording as it is
being made.
0 FL DIMMER button (See p.49)
Use to adjust the brightness of the main display.
- INPUT SELECTOR dial
Turn to select a source component. The source
indicators show the current component:
DVD/LD : DVD player or Laser Disc player.
TV/SAT : TV tuner or satellite tuner.
CD : Compact Disc player.
MD/TAPE 1 : Tape deck or Mini Disc recorder
connected to MD/TAPE 1 inputs/outputs.
TUNER : The built-in tuner.
PHONO : Turntable.
VIDEO : Video camera (etc.) connected to the
VIDEO INPUT on the front panel.
VCR 1 : Video cassette recorder connected to
VCR 1 inputs.
VCR 2 : Video cassette recorder or other
component connected to VCR 2 inputs.
STANDBY/ON
INPUT
SELECTOR
MASTER
VOLUME
PHONES
S-VIDEO
5-CHANNEL EQUAL POWER OUTPUT
VIDEO
EXTERNAL
DECODER IN DIRECT LOUDNESS MIDNIGHT
DIGITAL
NR
SIGNAL
SELECT
CLASS FM/AM
TUNER CONTROL
MEMORYMPXINPUT ATTSPEAKERS
–
TUNING +
–
STATION +
–
TREBLE +
–
BASS +
L AUDIO R
VIDEO INPUT
STANDBY/ON
DSP
MODE
TAPE 2
MONITOR
DOWN UP
THX CINEMA ADVANCED STANDARD
FL
DIMMER
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
Digital Signal Processor
STEREO
/DTS
MPEG
213456 7890-=
£
~ !@#$%
&*()_+
¡™
^
VSX-D938TX