Filter
Top Products
25
Displays and Controls
PREPARATION
8 SYSTEM SETUP button
Use to set up the speaker and sound systems.
For more information, see “Surround Sound
Setup” on p. 26.
9 REMOTE SETUP button.
Use to customize the remote control functions
and the remote control itself. (See “Setting Up
the Remote Control to Control Other
Components” on p.54, “Multi Operation” on p.
69.)
To access the EXTERNAL DECODER option,
press the REMOTE SETUP button and the
SIGNAL SELECT button simultaneously.
0 MIDNIGHT button (See p. 46)
Switches the MIDNIGHT LISTENING mode on or
off.
- MULTI OPERATION button
Use this button to start the MULTI OPERATION
mode. See p. 69 for how to program and use the
MULTI OPERATION mode.
= SYSTEM OFF button
This button turns off components in two ways.
First, when pressed it will turn off all PIONEER
components. Secondly, any component that has
programmed into the MULTI OPERATIONS
settings will also be turned off. (see p.69).
For example : If you programmed power off in
the SYSTEM OFF settings for your TV and VCR,
pressing the SYSTEM OFF button will turn off
these components even if they are not PIONEER
products.
~ RECEIVER button
Press to turn power of the receiver on or to
STANDBY (off).
! Number buttons
These buttons can perform a variety of different
functions depending on the remote operation
mode. They are most useful for CD and tuner
operations.
@ DISC/DISPLAY button
These buttons can perform a variety of different
functions depending on the remote operation
mode.
# MASTER VOLUME button
Use to raise or lower the volume of the receiver.
$ MUTE button
Press to mute or restore the volume.
% FUNCTION button
Press to select a source. The button will cycle
through all the possible sources.
^ SIGNAL SELECT button
Press SIGNAL SELECT repeatedly to select one
of the following:
ANALOG : To select an analog signal.
DIGITAL : To select a digital signal (DVD/LD,
TV/SAT, CD, MD/TAPE 1, VCR 1, VCR 2).
AC-3 RF: To select an AC-3 RF signal (DVD/LD,
TV/SAT, VCR 1, VCR 2). (VSX-D938TX only)
AUTO: This is the default. If there are both
analog and digital input signal, the receiver
automatically selects the best possible signal.
Press the SIGNAL SELECT and REMOTE SETUP
buttons simultaneously to switch from the
SIGNAL SELECT operation to EXTERNAL
DECODER operation.
Then press the button to get the EXTERNAL
DECODER function. To get back to the SIGNAL
SELECT control, press the REMOTE SETUP
button and the SIGNAL SELECT button
simultaneously once again. (VSX-D938TX only)
& 2/dts/MPEG (VSX-D938TX only)
buttons (See p.41)
Press these buttons to put the receiver in the
selected sound mode. For more information on
the modes .
* STEREO/DIGITAL NR button
STEREO : Press this button to put the receiver
into stereo mode when it is in a different sound
mode. For more information on the sound
modes, see p.41.
DIGITAL NR : Switches the DIGITAL NR on or off
(see p.44).
( DSP button (See p.41)
Press repeatedly to select a DSP sound mode.