Filter
Top Products
31
Surround Sound Set Up
SET
UP
Channel delay
Adding a slight delay to some speakers is necessary to achieve a surround sound effect. You need to figure out
the distance from your listening position to your speakers to add the proper delay. The following steps show you
how to set the delay time for each channel by specifying the distances from your listening position to each
speaker. Once you specify the speaker distances, the receiver calculates the correct delay times automatically.
If continuing from SPEAKER SETTING, go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for
Surround Sound” (p.27) first.
1
Select CHANNEL DELAY (if continuing from last set
up, it will already be selected).
See “Setting Up for Surround Sound” on page 27 if you are unsure
how to do this.
Press ENTER.
[3.0m]
[3.0m]
[3.0m]
[3.0m]
[3.0m]
[3.0m]
Channel Delay
Front L
Center
Front
Surround
Surround
Subwoofer
[EXIT]
L
R
R
L
The default setting is 3.0 m.
2
Use the 5¥∞ buttons to select a speaker. Specify the
distance from your listening position to each speaker
using the commands below.
1 Press 2 or 3 to adjust the speaker distance in 0.3 m.
increments from 0.3 to 9.0 m.
2 Use the 5¥∞ buttons to move to the next set of speakers
3 Repeat for each speaker.
NOTE : Sound takes about 1 ms (millisecond) to travel 0.3 m.
3
Select EXIT with the 5¥∞ buttons and press ENTER to
return to the SYSTEM SETUP MENU.
Next, proceed to CHANNEL LEVEL below.
If you want to change a setting before proceeding
Simply use the arrow buttons to go back.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
THX
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DISPLAYRF ATT
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2/dts
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1
23
4
56
7
+10
89
0
DISC
Î
¶
738
1¡4¢
+
-
+
-
+
-
MPEG
1-3
VSX-D938TX