Filter
Top Products
<ARB7050>
33
ONE TOUCH OPERATION SET UP (GUI OPERATION)
÷Sets the operation signal that is transmitted when a remote
control ONE TOUCH OPERATION button is pressed.
÷Initially, Pioneer remote control signals are transmitted.
(Figure 1)
(Figure 1: Initial settings for LD)
To operate other manufacturers’ components, first complete
REMOTE SET UP procedures (page 31).
Example : When you want to change LD ONE TOUCH
OPERATION commands.
1. Press the SET UP button for display of the operation buttons
of each function.
The SET UP MENU is displayed.
2. Select LD from the five ONE TOUCH OPERATION SET UP
function buttons.
ONE TOUCH OPERATION SET UP indications are displayed.
(Example: LD)
L
TV
LD
T
UN
ER
V
C
R 1
C
D
V
C
R
2
TA
P
E
Press the
LD button.
1 ~ 4
: You can select which operation buttons will transmit operation
signals and those which will not.
When the operation button’s character is black, a signal will be
transmitted. If it is gray, it will not be transmitted. The button’s
character color changes each time it is pressed.
÷With other manufacturers’ components, if power is on when the
POWER signal is transmitted, power is switched off.
When the TV “FUNC” signal is transmitted, the TV function may
not become the function connected to the receiver.
For this reason, when other manufacturers’ presets are called up
with REMOTE SET UP, commands are not automatically
transmitted.
5, 6
: TV and LD manufacturers settings are displayed.
÷If you use REMOTE SET UP (page 31) to call up another
manufacturers’ presets, that manufacturers’ name is displayed.
÷When you use the REMOTE SET UP learning function (page
32), the “PIONEER” indication becomes gray. Remote control
signals set with REMOTE SET UP are transmitted.
To return to the original Pioneer remote control commands,
press the ON/OFF button (on the left of “PIONEER”) to turn the
“PIONEER” indication black.
(If they are not the original Pioneer remote control commands,
even Pioneer components may switch OFF when the POWER
command is transmitted, or there may be some other incorrect
operation.)
3. After completing the settings, press the EXIT button.
NOTE:
With original Pioneer remote control commands, the TV function
always becomes “LD”, so connect the receiver’s VIDEO OUT
(TO MONITOR TV) terminal to the TV’s LD video input terminal.
The transmitted signal is .....
manufacturer ..... PIONEER
TV .................. POWER ON
TV ...................... FUNC. LD
LD .................. POWER ON
LD ............................. PLAY
SET UP MENU
ONE TOUCH
OPERATION SET UP
L D
C D
REMOTE SET UP
EXIT
VCR 1 VCR 2 TAPE 1
L D
C D
VCR 1 VCR 2 TAPE 1
T V
ONE TOUCH
OPERATION SET UP
FUNC
EXIT
LD
LD
LD
TV
TV
TV
LD
PIONEER
POWER POWER
PIONEER
1 2 3 4
5
6