Filter
Top Products
<ARB7050>
21
REMOTE CONTROL OPERATION
RECEIVER CONTROL BUTTONS
4 ONE TOUCH OPERATION buttons
VCR 1/2, CD, LD, TAPE:
Pressing these buttons automatically calls up “ONE TOUCH
OPERATION SET UP” settings, made using GUI (page 33).
TUNER:
This switches power to the TUNER ON and starts reception of the
last memorized station.
Also, if power to this unit is OFF, it is switched ON and operation
automatically switches to the selected function. When you press
any of the ONE TOUCH OPERATION buttons, the GUI MODE
switches off.
5 FUNC. (function) button
Press to select the receiver input.
6 TAPE 2 (TAPE 2 MONITOR) button
Switches TAPE 2 MONITOR on and off.
7 GUI button
Switches GUI MODE on and off.
When the GUI mode is on, the 9 Select/Adjust buttons (%, #, fi,
@) light.
8 M.CHECK (Mode check) button
Indicates whether the GUI MODE is on or off.
When it is on, %, #, fi, @ light. When it is off, a 4 ONE TOUCH
OPERATION button lights to indicate the current function.
If you press the button again while it is lit, remote control
functions change. When the remote control is in the GUI mode,
the 9 Select/Adjust buttons (%, #, fi, @) light.
9 Select/Adjust buttons (%, #, fi, @)
When the GUI mode is on, %, #, fi and @ light.
When using the GUI function with the on-screen display, use for
such operations as selection and adjustments (by moving the
cursor).
When the GUI mode is off, use to operate other components.
0 MUTE button
Used to temporarily mute the sound. When it’s in the on position,
the indicator on the MASTER VOLUME knob flashes. The volume
is restored when pressed again.
OPERATING OTHER COMPONENTS
REMOTE CONTROLLING OF ANY OTHER OF YOUR
AUDIO-VISUAL COMPONENTS VIA THIS UNIT
REQUIRES:
All components must be remote controllable (have a sensor
window on the front panel) to receive a direct command from
this unit, upon successful learning of those commands by
this programmable unit.
When operating components other than the receiver:
1. Press the ONE TOUCH OPERATION button for the component
you want to operate.
2. Press the operation button.
NOTE:
Components that could not originally be operated by remote
control cannot be controlled by this unit’s remote control.
VCR 1
3
VCR 2 VIDEO TV/SAT LD
CD
TUNER PHONO TAPE 1
2
333 3
222
1 RECEIVER POWER button
Switches the receiver power between ON and STANDBY.
2 ENTER button
When GUI is on, press to execute an operation selected with the
Select/Adjust buttons.
3 VOLUME +, – buttons
Adjusts the overall volume.
TV FUNC.
TV VOL.
TV CH
TV POWER
LD
CDVCR 1
TUNER
FUNC.
TAPE2
MUTE
RECEIVER
POWER
ST+ST–
ENTER
G
U
I
V
O
L
U
M
E
P
O
W
E
R
M
.
C
H
E
C
K
ONE TOUCH OPERATION
VCR 2
TAPE
FOR AV RECEIVER
FQ +
FQ -
7
8
9
10
1
2
3
4
5
6