Filter
Top Products
<ARB7050>
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
READ INSTRUCTIONS
—
All the safety and operating
instructions should be read before the appliance is
operated.
RETAIN INSTRUCTIONS
—
The safety and operating
instructions should be retained for future reference.
HEED WARNING
—
All warnings on the appliance and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS
—
All operating and use
instructions should be followed.
WATER AND MOISTURE
—
The appliance should not
be used near water – for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
LOCATION
—
The appliance should be installed in a
stable location.
WALL OR CEILING MOUNTING — The appliance
should not be mounted to a wall or ceiling.
VENTILATION
—
The appliance should be situated so
that its location or position does not interfere with its
proper ventilation. For example, the appliance should
not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings; or, placed in
a built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the
ventilation openings.
HEAT
—
The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.
POWER SOURCES
—
The appliance should be
connected to a power supply only of the type
described in the operating instructions or as marked
on the appliance.
POWER-CORD PROTECTION
—
Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point where
they exit from the appliance.
POLARIZATION
—
If your purchased product is
provided with a polarized power plug, please read the
following instructions. This product is equipped with
a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
CLEANING
—
The appliance should be cleaned only
with a polishing cloth or a soft dry cloth. Never clean
with furniture wax, benzine, insecticides or other
volatile liquids since they may corrode the cabinet.
POWER LINES
—
An outdoor antenna should be
located away from power lines.
NONUSE PERIODS
—
The power cord of the appliance
should be unplugged from the outlet when left
unused for a long period of time.
OBJECT AND LIQUID ENTRY
—
Care should be taken
so that objects do not fall and liquids are not spilled
into the enclosure through openings.
DAMAGE REQUIRING SERVICE
—
The appliance
should be serviced by a Pioneer authorized service
center or qualified service personnel when:
The power–supply cord or the plug has been
damaged.
• Objects have fallen, or liquid has been spilled into the
appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate normally or
exhibits a marked change in performance.
• The appliance has been dropped or the enclosure
damaged.
SERVICING
—
The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
OUTDOOR ANTENNA GROUNDING
—
If an outside
antenna is connected to the antenna terminal, be
sure the antenna system is grounded so as to
provide some protection against voltage surges and
built-up static charges.
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode. See Fig. A.
CART
—
An appliance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
NEC — NATIONAL ELECTRIC CODE
GROUND
CLAMP
SAFETY INSTRUCTIONS
GROUND
CLAMP
GROUND
CLAMP
GROUND
CLAMP
GROUND
CLAMP
•
GROUND
CLAMP
GROUND
CLAMP
ANTENNA
LEAD-IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810
–
20)
GROUNDING CONDUCTORS
(NEC SECTION 810
–
21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
FIG. A
GROUND
CLAMP
GROUND
CLAMP
GROUND
CLAMP
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.