Pioneer VSX-AX10Ai-G Stereo Receiver User Manual


 
Advanced setup
11
88
En
Chapter 11
Advanced setup
The Input Assign menu
You only need to make settings in the Input Assign menu
if you didn’t hook up your digital equipment according to
the default settings for the digital inputs, or if you have
connected equipment using component video or i.LINK
cables.
To access the Input Assign menu, follow the steps below.
1 Make sure your receiver and TV are both
switched on.
2 Using the remote control, press RECEIVER on the
touch screen, then press the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/// hard keys and ENTER on the remote control
to navigate through the screens and select menu items.
The / (cursor up/down) hard keys select menu
items and the / (cursor left/right) hard keys
change the setting of the item selected.
3 Select ‘Input Assign’ then press ENTER.
The Input Assign menu appears on screen:
Assigning the digital inputs
Default settings:
Digital-1 (coaxial) – DVD/LD
Digital-2 (coaxial) – TV/DVD
Digital-3 (coaxial) – CD
Digital-4 (optical) – SAT
Digital-5 (optical) – DVR (/VCR1)
Digital-6 (optical) – CD-R (/TAPE1/MD)
2 RF (coaxial) – DVD/LD
You only need to do this if you didn’t hook up your digital
equipment according to the default settings for the
digital inputs (see above). This setting tells the receiver
what digital equipment is hooked up to which terminal so
the buttons on the remote correspond to what you have
hooked up.
1 Select ‘Digital In’ from the Input Assign menu
and press ENTER.
2 Select the number of the digital input to which
you’ve connected your digital component.
The numbers correspond with the numbers beside the
inputs on the back of the receiver.
3 Use the / (cursor left/right) hard keys to
select the component that corresponds with the one
you connected to that input.
Select between DVD/LD, TV/DVD, SAT, DVR, VCR 2,
VCR 3, CD or CD-R (however, the RF IN setting doesn't
include CD or CD-R).
If you assign a digital input to a certain function (for
example, DVD/LD) then any digital inputs previously
assigned to that function will automatically be
switched off.
RECEIVER
MENU MUTE
CHANNEL VOLUME
SYSTEM
SETUP
ENTER
HOME
SYSTEM
OFF
TV
CONT
MULTI
OPERATION
TV
/ DVD
DVD
/ LD
DVR
/ VCR1
SAT
INPUT 1 2 3
CD TUNER
SETUP
RECEIVER
RECEIVER
1/3
System Setup
[Auto Surround Setup]
[1. Input Assign ]
[2. Surround Setup ]
[3. Expert Setup ]
[4. THX Audio Setup ]
[Exit]
1.Input Assign
[ 1.Digital In ]
[ 2.Component Video In ]
[ 3.i.LINK In ]
[ 4.Video Assign ]
[Return]
1.Input Assign
[ 1.Digital In ]
[ 2.Component Video In ]
[ 3.i.LINK In ]
[ 4.Video Assign ]
[Return]
1.1. Digital-In
Digital-1 [ DVD/LD ]
Digital-2 [ TV/DVD ]
Digital-3 [ CD ]
Digital-4 [ SAT ]
Digital-5 [ DVR ]
Digital-6 [ CD-R ]
RF IN [ DVD/LD ]
[Return]