Filter
Top Products
Controls and displays
03
33
En
15 INPUT (page 39)
Press repeatedly to cycle through all possible input
sources.
16 SPEAKER A/B (page 80)
Press repeatedly to select speaker system A,B, A/B or off
(in that order). (See Caution on page 80 for exceptions to
this).
17 VIDEO SELECT (page 76)
Press repeatedly to select the video source.
18 TAPE 2 MONITOR (page 74)
Press to monitor recordings on the device connected to
the TAPE 2 MONITOR inputs/outputs as they are being
made.
19 SB CH MODE (page 48)
Use to select the surround/virtual back channel mode.
20 INPUT ATT (page 75)
Press to switch the input attenuator on/off.
21 DISPLAY DIMMER (page 77)
Use to adjust the brightness of the front panel display.
22 STATUS (page 78)
Press to check selected receiver settings.
Remote control displays for the tuner
The functions on these screens are used to control the
tuner (see also Using the tuner on page 53).
1 STATION + / – (page 54)
Press to select station presets.
2 TUNING + / – (page 53)
Use to select a listening mode.
3 CLASS (page 54)
Press to switch between the three banks (classes) of
station presets.
4 BAND (page 53)
Press to switch between AM and FM radio bands.
5 DISP MODE (page 55)
Press to switch between the frequency display and the
station name display.
6
Press to return to the main Home menu (see Home menu
screens above).
7 / (soft keys)
Press to go to the previous/next receiver menu screen.
8 MPX (page 54)
Press to listen to a radio broadcast in mono.
9 TUNER EDIT (page 54)
Press to memorize and name a station preset.
10
Press to go to the receiver main menu (see Receiver
menu screens above).
RECEIVER
3/3
SB CH
MODE
INPUT
STATUS
INPUT
AT T
SPEAKER
A/B
VIDEO
SELECT
TAPE2
MONITOR
DISPLAY
DIMMER
RECEIVER
TV
CONT
15
19
16
17
18
20
21
22
TUNER 1/2
TV
CONT
BAND
STATION
TUNING
CLASS MPX
DISP MODE TUNER EDIT
–
+
+
–
4
8
5
7
1
2
3
6
9
10