Filter
Top Products
Making recordings
10
57
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 10:
Making recordings
Making an audio or a video
recording
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
Keep in mind you can’t make a digital
recording from an analog source or vice-versa,
so make sure the components you are
recording to/from are hooked up in the same
way (see
Connecting up
on page 15 for more on
connections).
VSX-515 model:
VSX-415 model:
1 Select the source you want to record.
Use the input select buttons (
INPUT
SELECTOR
).
2 Select the input signal (if necessary).
Press
SIGNAL SELECT
to select the input
signal corresponding to the source component
(see page 34 for more on this).
3 Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4 Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
1
Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
automatically—check the component’s
instruction manual if you’re unsure.
5 Start recording, then start playback of the
source component.
INPUT SELECTOR
RECEIVER
CD-R/
TAPE/MD
MIDNIGHT/ADVANCED
SLEEP
DVD/LD
CD FM AM
TV/SAT DVR/VCR
DVD 5.1CH
FL DIMMER
INPUT ATT
STANDARD
ADVANCED
SURR
ST/DIRECT
/AUTO SURR
SIGNAL
SELECT
LISTENING MODE
STANDARD
VSB
MODE
ADVANCED
SURROUND
STEREO/
DIRECT
LISTENING MODE
QUICK
SETUP
SPEAKER
IMPEDANCE
TONEMUTE
SIGNAL
SELECT
TUNER
EDIT
MULTI JOG
PTY
SEARCH
EON
MODE
Note
1 The receiver's volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.
VSX_415-515.fm 57 ページ ２００５年１月２１日 金曜日 午後５時３分