Filter
Top Products
The System Setup menu08
52
En
•
MAX
– Dynamic range is reduced (loud
sounds are reduced in volume while
quieter sounds are increased).
3 When you're finished, press
RETURN
.
Dual Mono Setup
• Default setting:
CH1
You can specify how dual mono encoded Dolby
Digital soundtracks should be played. Dual
mono is not widely used, but is sometimes
necessary when two languages need to be sent
to separate channels.
1
1 Select DUAL MONO from the OTHER
setup menu.
2 Use
/
(cursor up/down) to choose the
setting that you want.
•
CH1
– Only channel 1 is played
•
CH2
– Only channel 2 is played
•
CH1 CH2
– Both channels are played
through the front speakers
3 When you're finished, press
RETURN
.
LFE Attenuator Setup
• Default setting:
ATT 0 dB
Some Dolby Digital and DTS audio sources
include ultra-low bass tones. Set the LFE
attenuator as necessary to prevent the ultra-
low bass tones from distorting the sound from
the speakers.
1 Select LFE ATT from the OTHER setup
menu.
2 Use
/
(cursor up/down) to choose the
setting that you want.
•
LFEAT 0
– No limiting (recommended
setting)
•
LFEAT 10
– 10dB of limiting
•
LFEAT **
– No sound from LFE channel
3 When you're finished, press
RETURN
.
Note
1 This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
VSX_415-515.fm 52 ページ ２００５年１月２１日 金曜日 午後５時３分