Filter
Top Products
Listening to your system06
34
En
Neo:6 Music settings
VSX-515 model only
• Default setting:
3
When listening to 2-channel sources in Neo:6
Music mode, you can adjust the center image
to create a wider stereo effect with vocals.
1
1 With Neo:6 MUSIC mode active, press
EFFECT/CH SEL repeatedly to select C.
IMAGE.
2 Use the +/– buttons to adjust the
setting.
Adjust the effect from
0
(all center channel
sent to front right and left speakers) to
10
(center channel sent to center speaker only).
Listening in stereo
When you select
STEREO
or
DIRECT
, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo.
• While listening to a source, press
STEREO
for stereo playback.
Press repeatedly to switch between:
•
STEREO
– The audio is heard with your
surround settings and you can still use the
Midnight, Loudness, and Tone control
functions.
•
DIRECT
– Bypass all effects and surround
settings so that the audio remains as close
to the source audio signal as possible.
2
•
AUTO SURR.
(VSX-515 model only)
– See
Auto playback
on page 31 for more on this.
Listening with Acoustic
Calibration EQ
VSX-515 model only
• Default setting:
OFF
/
ALL CH
(after the
Auto MCACC Setup or EQ Auto Setting)
You can listen to sources using the Acoustic
Calibration Equalization set in
Automatically
setting up for surround sound (MCACC)
on
page 13 or
Acoustic Calibration EQ
on page 46.
Refer to these pages for more on Acoustic
Calibration Equalization.
• While listening to a source, press
ACOUSTIC EQ.
Press repeatedly to select between:
•
ALL CH
– No special weighting is given to
any one channel.
•
F. ALIGN
– All speakers are heard in
accordance with the front speaker
settings.
•
CUSTOM 1/2
– Custom settings
•
EQ OFF
– Switches Acoustic Calibration
EQ off.
Note
1 Note that this is only available when using a center speaker.
EFFECT/CH SEL
DIALOG E
LEVEL
SIGNAL
SELECT
TUNER
EDIT
TUNER
CLASS
MUTE
VOLUME
RECEIVER CONTROL
INPUT SELECTOR
RECEIVER
CD-R/
TAPE/MD
MIDNIGHT/
LOUDNESS
ADVANCED
SURROUND
STANDARD STEREO
SLEEP
DVD/LD
CD FM AM
TV/SAT DVR/VCR
DVD 5.1CH
FL DIMMER
INPUT ATT
2 If you switch on Midnight listening, Loudness, Dialog Enhancement (VSX-515 model only), or the Tone controls when
DIRECT
is selected, the receiver automatically switches to
STEREO
.
EFFECT/CH SEL
DIALOG E
LEVEL
ACOUSTIC
EQ
TUNER
EDIT
TUNER
CLASS
MPX
DVD
MUTE
VOLUME
RECEIVER CONTROL
VSX_415-515.fm 34 ページ ２００５年１月２１日 金曜日 午後５時３分