Filter
Top Products
The System Setup menu08
44
En
Chapter 8:
The System Setup menu
VSX-515 model only
Making receiver settings from
the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the receiver and also explains how to fine-tune
individual speaker system settings to your
liking.
1 Press
RECEIVER
on the remote control,
then press the SYSTEM SETUP button.
• Press
SYSTEM SETUP
again at any time to
exit the System Setup menu.
2 Use
/
(cursor left/right) to select the
setting you want to adjust then press
ENTER
.
Press
RETURN
to confirm and exit the current
menu.
•
A. MCACC
– This is a quick and effective
automatic surround setup (see
Automatically setting up for surround
sound (MCACC)
on page 13).
•
M. MCACC
– Fine tune your speaker
settings and customize the Acoustic
Calibration EQ (see
Manual MCACC
speaker setup
below).
•
SP SETUP
– Specify the size, number,
distance and overall balance of the
speakers you’ve connected (see
Manual
speaker setup
on page 48).
•
IN ASSIG.
– Specify what you’ve connected
to the digital and component video inputs
(see
The Input Assign menu
on page 51).
•
OTHER
– Make customized settings to
reflect how you are using the receiver (see
The Other setup menu
on page 51).
Manual MCACC speaker setup
You can use the settings in the Manual MCACC
setup menu to make detailed adjustments
when you’re more familiar with the system.
Before making these settings, you should have
already completed
Automatically setting up for
surround sound (MCACC)
on page 13.
You only need to make these settings once
(unless you change the placement of your
current speaker system or add new speakers).
Important
• For some of the settings below, you’ll have
to connect the setup microphone to the
front panel and place it about ear level at
your normal listening position. See
Automatically setting up for surround
sound (MCACC)
on page 13 if you’re
unsure how to do this. Also see
Other
problems during Auto MCACC
on page 14
for notes regarding high background noise
levels and other possible interference.
• If you’re using a subwoofer, switch it on
and turn up the volume to the middle
position.
INPUT SELECTOR
RECEIVER
CD-R/
TAPE/MD
MIDNIGHT/
LOUDNESS
ADVANCED
SURROUND
STANDARD
SYSTEM
SETUP
RECEIVER
RETURN
TOP MENU
DVD
STEREO
SLEEP
DVD/LD
CD FM AM
TV/SAT DVR/VCR
DVD 5.1CH
FL DIMMER
INPUT ATT
MENU
RECEIVER CONTROL
ENTER
VSX_415-515.fm 44 ページ ２００５年１月２１日 金曜日 午後５時３分