Other connections
10
63
En
English
Français
Deutsch
Nederlands
Italiano
Español
• Use a 3-ringed miniplug SR+ cable
1
to
connect the
CONTROL IN
jack of this receiver
with the
CONTROL OUT
of your flat panel TV.
Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See
SR+ Setup for Pioneer flat panel TVs
on page 66
for detailed instructions.
To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the flat panel TV, and just connect the audio
(analog and/or digital) to this receiver.
Using the SR+ mode with a Pioneer
flat panel TV
When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer flat panel
TV even easier. These features include:
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
flat panel TV.
• Automatic volume muting on the flat
panel TV.
2
See also
SR+ Setup for Pioneer flat panel TVs
on page 66 for more on setting up the receiver.
1 Make sure that the flat panel TV and this
receiver are switched on and that they are
connected with the SR+ cable.
See
Using this receiver with a Pioneer flat panel
TV
above for more on this.
2 To switch SR+ mode on/off, press
RECEIVER
, then the SR+ button.
The front panel display shows
SR+ ON
or
OFF
.
Note
1• The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer
Customer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-
ringed mini phone plug for the connection).
• If you connect to a Pioneer flat panel TV using an SR+ cable, you will need to point the remote control at the flat panel TV
remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you
switch the flat panel TV off.
DVD player
VSX-918V
Pioneer flat panel TV
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
TV/SAT
AUDIO IN
DVD/BD
AUDIO IN
MASTER
VOLUME
VSX-918V
STANDBY/ON
PHONES
DVD DVRTV
VIDEO/PORTABLE
CD/CD-R
iPod
FM/AM
XM
SPEAKERS
VSB MODE
SIGNAL
SELECT
SOUND
RETRIEVER
SIRIUS
AUX
PHASE
CONTROL
INPUT
SELECTOR
ADVANCED
SURROUND
STEREO /
A.L.C.
STANDARD
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
ACOUSTIC
EQ
PHASE
CONTROL
AUTO SURR /
STREAM DIRECT
MCACC
PORTABLE
iPod DIRECT
AUDIORL
VIDEO
DIGITAL PRECISION
PROCESSING
2 The automatic volume muting feature is enabled separately; see
SR+ Setup for Pioneer flat panel TVs
on page 66.
RECEIVER
INPUT SELECT
TV CTRL
SOURCE
TV DVR
SIRIUS
AM
XM
FM
CD-R
CD
PORTABLE
iPodDVD
RECEIVER
MULTI CONTROL
STEREO/
TV CONTROL
MPX
DIMMER
iPod CTRL
SLEEP
D.ACCESS
SIGNAL SEL
TV CH
INPUT
SELECT
TUNER DISP
CLASS
DISC
SR
+
ENTER
INFO
SHIFT
TV VOL
MIDNIGHT
ANALOG ATT
+
10
VSX_918_818_KU.book 63 ページ 2008年5月15日 木曜日 午後6時46分