Filter
Top Products
Listening to your system
05
33
En
English
Français
Deutsch
Nederlands
Italiano
Español
Listening with Acoustic
Calibration EQ
• Default setting:
OFF
/
ALL CH
(after the
Auto MCACC Setup or EQ Auto Setting)
You can listen to sources using the Acoustic
Calibration Equalization set in
Automatically
setting up for surround sound (MCACC)
on
page 8 or
Acoustic Calibration EQ
on page 40.
Refer to these pages for more on Acoustic
Calibration Equalization.
• While listening to a source, press
ACOUSTIC EQ
.
Press repeatedly to select between:
•
ALL CH
– No special weighting is given to
any one channel.
•
F. ALIGN
– All speakers are heard in
accordance with the front speaker settings.
•
CUSTOM 1/2
– Custom settings
•
EQ OFF
– Switches Acoustic Calibration
EQ off.
The MCACC indicator on the front panel lights
when Acoustic Calibration EQ is active.
1
Using Virtual Surround Back
(VSB)
Selecting this mode allows you to hear a
virtual surround back channel through your
surround speakers. For example, you can
choose to listen to sources with no surround
back channel information (for example, 5.1
encoded material) with emulated 6.1
encoding (
VSB ON
). Sometimes the material
may sound better in the 5.1 format for which it
was originally encoded. In this case you can
simply switch it off (
VSB OFF
).
2
Depending on the input signal and the
Listening Mode, the Virtual Surround Back
mode may not be effective.
•
Press VSB MODE (front panel) to select
a virtual surround back channel option.
Each press cycles through the options as
follows:
•
VSB ON
– Virtual Surround Back is always
used (for example, on 5.1 encoded
material)
•
VSB OFF
– Virtual Surround Back mode is
switched off
Note
1 You can’t use Acoustic Calibration EQ with
DVD 5.1ch
, Stream Direct mode, WMA9 Pro or XM HD Surround, and it has no
effect with headphones.
AUTO/ DIRECT
PHASE
ADV SURR
SOUND
RETRIEVER
STEREO/
A.L.C.
ACOUSTIC
EQ
STANDARD
DIALOG
2 The Virtual Surround Back mode is not effective when using headphones, Stream Direct, Stereo, Auto level control stereo
mode, Front Stage Surround Advance mode. It is also unavailable if the surround speaker is set to
NO
in
Speaker Setting
on
page 42.
STANDBY/ON
PHONES
DVD
DVRTV
VIDEO/PORTABLE
SPEAKERS
SIGNAL
SELECT
SOUND
RETRIEVER
PHASE
CONTROL
INPUT
SELECTOR
VSB MODE
VSX_918_818_KU.book 33 ページ ２００８年５月１５日 木曜日 午後６時４６分