Connecting up
03
15
En
English
Français
Deutsch
Nederlands
Italiano
Español
Windows Media and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Connecting an HDD/DVD recorder,
VCR and other video sources
This receiver has audio/video inputs and
outputs suitable for connecting analog or
digital video recorders, including VCRs and
HDD/DVD recorders.
1 Connect a set of audio/video outputs on
the recorder to the DVR/VCR AUDIO and
VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
1
2 Connect a set of audio/video inputs on
the recorder to the DVR/VCR AUDIO and
VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
3 If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the
DIGITAL OPT 1 (CD)
input.
2
The illustration shows the VSX-918V, but
connections for the VSX-818V are the same.
Note
1 If your video component also has a component video output, you can connect this too. See
Using the component video jacks
on page 16 for more on this.
2 In this case, you’ll need to tell the receiver which digital input you connected the component to (see
The Input Assign menu
on page 64).
HDMI
(
DVD / BD
)
IN
IN
RL
IN
AUX
CD
IN
OUT
DVD / BD
TV
/ SAT
FRONT
DVD5.1
CH INPUT
IN
IN
DVR
/ VCR
DVR
/ VCR IN
TV
/ SAT IN
DVD
/ BD IN
AM
LOOP
IN
OUT
DIGITAL IN
OPT
OPT
(
TV / S
A
(
CD
)
FM UNB
AL
CONTROL
ANTENNA
DVR
/ VCR OUT
MONITOR
OUT
AUDIO VIDEO
XM
IN
IN
OUT
DIGITAL IN
COAX
(
DVD / BD
)
(
ASSIGNABLE
)
CD-R
/ TAPE
/ MD
(
ASSIGNABLE
)
(
ASSIGNABLE
)
S
P
E
A
K
E
R
S
1
1
1
2
(
TV / SAT
)
IN
OUT
2
SUB
WOOFER
PREOUT
R L
VIDEO IN
AUDIO IN
IN
R L
AUDIO OUT
PLAY
OUT
VIDEO OUT
REC
3
21
DIGITAL OUT
OPTICALCOAXIAL
DVR, VCR, LD player, etc.
VSX-918V
VSX_918_818_KU.book 15 ページ 2008年5月15日 木曜日 午後6時46分