Filter
Top Products
Listening to your system06
42
En
Using the Virtual Surround Back
mode (VirtualSB)
Selecting this mode allows you to hear a virtual
back channel through your surround speakers.
For example, you can choose to listen to
sources with no surround back channel
information (for example, 5.1 encoded
material) with emulated 6.1 encoding (
VSB
ON
). Sometimes the material may sound
better in the 5.1 format for which it was
originally encoded. In this case you can have
the receiver only apply this effect to 6.1
encoded sources like Dolby Digital EX or DTS-
ES (
VSB AUTO
), or you can simply switch it off
(
VSB OFF
).
1
The table indicates when you will hear the
virtual surround back channel.
• Press
EXTENDED MODE
(front panel)
repeatedly to select a virtual surround back
channel option.
Press repeatedly to select between:
•
VSB ON
– Virtual Surround Back is always
used (for example, on 5.1 encoded
material)
•
VSB AUTO
– Virtual Surround Back is
automatically applied to 6.1 encoded
sources (for example, Dolby Digital EX or
DTS-ES)
•
VSB OFF
– Virtual Surround Back mode is
switched off
Note
1• You can’t use the Virtual Surround Back mode with headphones or the
STEREO
/
DIRECT
mode.
• You can only use the Virtual Surround Back mode if the surround speakers are on and the
Surr Back
setting is set to
NO
in
the
Speaker setting
on page 51.
• The Virtual Surround Back mode cannot be applied to sources that do not have surround channel information.
• You can’t adjust the surround back channel level when you’re listening to the virtual surround back channel.
Type of source
VSB
mode
Standard
Advanced
surround
Multichannel
sources
Stereo sources
2
Pro Logic
II
2
Pro Logic
Neo:6
Dolby Digital EX/
DTS-ES encoded
multichannel source
with 6.1ch surround
ON
ìì
AUTO
ìì
Dolby Digital/DTS
encoded
multichannel source
ON
ìì
AUTO
ì
Dolby Digital/DTS
encoded stereo
source; other digital
stereo source
ON
ì ììì
AUTO
ìì
Analog 2-channel
(stereo) source
ON
ì ììì
AUTO
ìì
VSX_815-915.book.fm 42 ページ ２００５年３月１日 火曜日 午前１０時２２分