Pioneer SX-LX03 Stereo Receiver User Manual


 
Additional information 11
59
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Dolby Pro Logic II – 5.1 channel sound
(stereo surround) from any stereo source
With two channel sources, the “.1” subwoofer
channel is generated by bass management in
the receiver.
Dolby Surround is an encoding system which
embeds surround sound information within a
stereo soundtrack, which a Dolby Pro Logic
decoder can then use for enhanced surround
listening with greater sound detail.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the double-D
symbol are trademarks of Dolby Laboratories.
DTS
The DTS technologies are explained below. See
www.dtstech.com for more detailed
information.
DTS Digital Surround
DTS Digital Surround is a 5.1-channel audio
coding system from DTS Inc. now widely used
for DVD-Video, DVD-Audio, 5.1 music discs,
digital broadcasts, and video games. It can
deliver up to six discrete audio channels,
comprising five full range channels, including
an LFE channel. Higher sound quality is
achieved through the use of a low compression
rate, and high rates of transmittance during
playback.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital Surround
are registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 1996-2007
DTS, Inc. All Rights Reserved.
Installation and maintenance
Hints on installation
We want you to enjoy using this system for
years to come, so please bear in mind the
following points when choosing a location:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such as a
table, shelf or stereo rack.
Don’t...
Use in a place exposed to high temperatures or
humidity, including near radiators and other
heat-generating appliances.
Place on a window sill or other place where the
system will be exposed to direct sunlight.
Use in an excessively dusty or damp
environment.
Place directly on top of an amplifier, or other
component in your stereo system that becomes
hot in use.
Use near a television or monitor as you may
experience interference — especially if the
television uses an indoor antenna.
Use in a kitchen or other room where the system
may be exposed to smoke or steam.
Use on a thick rug or carpet, or cover with cloth
— this may prevent proper cooling of the system
unit.
Place on an unstable surface, or one that is not
large enough to support all four of the system
unit’s feet.
LX03BD_1.book Page 59 Monday, July 28, 2008 2:12 PM