Pioneer SX-LX03 Stereo Receiver User Manual


 
Advanced settings06
114
En
Changing to other language at
language setting
Note
Refer to Language Code Table on page 130.
If a language not recorded on the BD/DVD
is set, one of the recorded languages is
automatically selected and played.
1 Select and set
Other
.
Use / to select, then press ENTER.
2 Change the language.
Use / to change, then press ENTER.
To change the language using numbers
1 Use
/
to select
Number
.
2 Use the number buttons
(0 to 9) to input the number, then press
ENTER
.
Changing the speaker setup
Set whether or not to use the speakers which
are connected to the AV receiver or amplifier,
as well as the size of the speakers. This setting
is only valid for analog audio outputs.
Note
•Select Initial Setup from the HOME
MENU, then press ENTER.
1 Select and set
Speakers
.
Use / to select, then press ENTER.
2 Select and set
Speaker Setup
Next Screen
.
Use / to select, then press ENTER.
Caution
This cannot be selected when Audio
Output Mode is set to 2 Channel. Change
the setting to Multi-channel (page 110).
3 Select the speaker and change the
setting.
Use / to select, then use / to change
the setting.
L/R (front left and right speakers): Small/
Large (this setting also applies to the C, SL/
SR and SBL/SBR speakers)
C (center speaker): Yes/No
ENTER
ENTER
CLEAR
123
456
78
0
9
ENTER
ENTER
Audio Output Mode
Speaker Setup
Channel Level
Multi-channel
Fix
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
ENTER
ENTER
L/R
C
SL/SR
SBL/SBR
Large
Yes
Yes
Yes
Speaker Setup
BD PLAYER
Use [ ][ ] to select a speaker, then press [ ][ ]
to select speaker option.
LX03BD_2.book Page 114 Monday, July 28, 2008 4:30 PM