Filter
Top Products
Surround sound settings08
44
En
Dynamic Range Control
When watching Dolby Digital or DTS material
at low volume, low level sounds — including
some of the dialog — can be difficult to hear
properly. Using one of the Dynamic Range
Control (DRC) settings can help by bringing up
the low level sounds, while controlling high
level peaks.
Dynamic Range Control works only with Dolby
Digital soundtracks and some DTS
soundtracks.
1
Open the ‘
Sound Setup
’
menu.
2 Select ‘
D.R.C.
’, then press
ENTER
.
3 Select a setting.
Select one of the following:
• D.R.C. High – Dynamic range is reduced
(loud sounds are reduced in volume while
quieter sounds are increased)
• D.R.C. Mid – Mid setting
• D.R.C. Off – No dynamic range adjustment
(use when listening at higher volume)
4 Press to exit.
Dual mono setting
Specifies how dual mono encoded Dolby
Digital soundtracks should be played. This
setting can also be used to change the audio
channels for DVD-RW discs recorded in
bilingual audio, and external inputs with
bilingual audio (HDMI and optical/coaxial
digital inputs).
1
Open the ‘
Sound Setup
’
menu.
2 Select ‘
Dual Mono
’, then press
ENTER
.
3 Select a setting.
Select one of the following:
• CH1 Mono – Only channel 1 is played
• CH2 Mono – Only channel 2 is played
• CH1/CH2 – Both channels are played
through the front speakers
Virtual Surround Back
This mode allows you to use your surround
speakers with standard surround setup to
listen to a virtual surround back channel. You
can choose to listen to sources with no
surround back channel information, or if the
material sounds better in the format (for
example, 5.1) for which it was originally
encoded, you can have the unit only apply this
effect to 6.1 encoded sources like Dolby Digital
EX or DTS-ES.
1
1
Open the ‘
Sound Setup
’
menu.
SETUP
TOOLS
ENTER
ENTER
ENTER
Note
1 • Depending on the input signal and the listening mode, the Virtual Surround Back mode may not be effective.
•
The Virtual Surround Back mode is not effective when the headphones are connected or when using the Front surround setup.
SETUP
TOOLS
ENTER
ENTER
SETUP
TOOLS
ENTER
LX03BD_1.book Page 44 Monday, July 28, 2008 2:12 PM