Filter
Top Products
Advanced settings 06
115
En
• SL/SR (left and right surround speakers):
Yes/No
• SBL/SBR (left and right surround back
speakers): Yes/No
Closing the speaker settings screen
• Press
ENTER
.
Adjusting the output level of the
various speakers (Channel Level)
Adjust each output level of the different
speakers by using test tones.
This setting is
only valid for analog audio outputs.
1 Select and set
Speakers
.
Use / to select, then press ENTER.
2 Select and set
Channel Level
, then
Fix
or
Variable
.
Use / to select, then press ENTER.
• Fix – The output level of all the speakers is
set to the maximum.
• Variable – The output level of all the
speakers is set 6.0 dB lower than when Fix
is selected. From this point, the output
levels of the L, C, R, SL, SR, SBL, SBR and
SW speakers can be adjusted within the
range of –6.0 dB to +6.0 dB.
• If you have selected Variable, proceed to
step 3.
Caution
• This cannot be selected when Audio
Output Mode is set to 2 Channel. Change
the setting to Multi-channel (page 110).
3 Select and set the method for
switching the speaker to be adjusted.
Use / to select, then press ENTER.
• Auto – Switch the speaker to be adjusted
automatically.
• Manual – Switch the speaker to be
adjusted manually.
Caution
• Test tones are output. Lower the volume of
the device connected to the player.
4 Adjust the output level.
Use / to select, / to adjust.
ENTER
Audio Output Mode
Speaker Setup
Channel Level
Multi-channel
Fix
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
ENTER
ENTER
Test Tone Switching
Select whether test tone output is
switched automatically or manually.
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Speaker Setup
BD PLAYER
Auto Manual
ENTER
L
C
R
SR
SBR
SBL
SL
SW
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
Channel Level
BD PLAYER
Use [ ][ ] to select a speaker, then press [ ][ ]
to adjust the channel level and then press ENTER.
LX03BD_2.book Page 115 Monday, July 28, 2008 4:30 PM