Filter
Top Products
Introduction of advanced
TV tuner operation
1
1
1
1 Function display
Shows the function names.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
BSSM appears on the display.
# To return to the channel display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returnedto
the channel display.
Storing and recalling
broadcast stations
You can easily store up to 12 broadcast sta-
tions for later recall.
1 When you find a station that you want
to store in memory press LIST to switch to
the preset channel list mode.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number; press and
hold to store.
The preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
# If you do not operate the list within about 30
seconds, the preset channellist mode iscan-
celed automatically.
Notes
! Up to 24stations, 12 for each of two TV bands,
can be storedin memory.
! You can also store stations assigned to preset
tuning numbers 1–6 by pressing and holding
one of the preset tuningbuttons 1–6 onthe re-
mote control.
Storing the strongest
broadcast stations
sequentially
1 Use MULTI-CONTROL and select
FUNCTION to display BSSM.
2 Press MULTI-CONTROL to turn BSSM
on.
Searching is displayed. While Searching is
displayed, the 12 strongest broadcast stations
will be stored in order from the lowest channel
up. When finished, the preset channel list ap-
pears.
# To cancel the storage process, press
MULTI-CONTROL.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also changethe station by pushing
MULTI-CONTROL up or down.
TV tuner
En
73
English
Section
12