Filter
Top Products
# To cancel the search, press MULTI-CONTROL
again.
Notes
! The program of some stations may differ from
that indicated by the transmitted PTY.
! If no stationis broadcasting the typeof pro-
gram you searchedfor, Not found is dis-
played for abouttwo secondsand then the
tuner returns tothe originalstation.
Using news program interruption
When a news program is broadcast from a
PTY code news station, the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
% Press TA/NEWS and hold to turn on
news program interruption.
Press TA/NEWS until NEWS ON appears in
the display.
# To turn off news program interruption, press
TA/NEWS and hold until OFF appears in the dis-
play.
# A news programcan becanceled by pressing
TA/NEWS.
# You can also cancel the news program by
pressing SOURCE, BAND or MULTI-CONTROL
while a news program is being received.
Note
You can also turnon or off news program in the
menu that appears by using MULTI-CONTROL.
Receiving PTY alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
! An emergency announcement can be can-
celed by pressing TA/NEWS.
! You can also cancel an emergency an-
nouncement by pressing SOURCE, BAND
or MULTI-CONTROL.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
! The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio texts.
1 Press DISPLAY and hold to display radio
text.
Radio text for the currently broadcasting sta-
tion is displayed.
# You can cancel radio text display by pressing
DISPLAY or BAND.
# When no radio text is received, No text ap-
pears in thedisplay.
2 Push MULTI-CONTROL left or right to
recall the three most recent radio texts.
Pushing MULTI-CONTROL left or right
switches between the current and the three
radio text data displays.
# If there is noradio text data in memory the dis-
play will not change.
RDS
En
24
Section
05